DASYS High Speed Dome User Manual

TC-D2600BS SERIES HIGH SPEED DOME CAMERA USER’S MANUAL

99 95 Settings 5.1 Interface 5.2 Dome Address, Transmission Speed, Protocol Setting Before the dome is installed, the communication protocol, baud

1010 10 *Notice: “1” means “on” status and “0” means “off” status. Protocol Setting Protocols Bit 1 Bit 2 Bit 3 PELCO_P 1 0 0 PELCO_D 0 1

1111 11 6 Preset Setting Speed dome camera supports 220 preset positions. The code numbers 1- 64 and 100-255 represent the 220 preset positions. You

1212 12Start sequence of group N Call upon 80 + call upon pp + call upon 98Start setting preset position for sequence of group N Call upon 80 + cal

1313 1315 Display information Set 74 + call upon pp “1” means ptz location information; “2” means temperature control information; “3” means alarm

1414 147 The OSD Menu Setting 7.1 Operation Method of the Menu The user can call upon preset position 95 to enter the setting interface of the OSD

1515 157.2 OSD Menu Tree LANGUAGE: ENGLISH<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS><

1616 16 MOTION ABCDEFG LANGUAGE: ENGLISH<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS><CAM

1717 17B.SCAN A1B1C1D1E1MOTION<SEQUENCE><PATTERN><ZONES><TIMING ACTION><AUTO TRACKING>BACKEXIT――――――――――――――<SCAN>

1818 18C.SEQUENCE MOTION<SEQUENCE><PATTERN><ZONES><TIMING ACTION><AUTO TRACKING>BACKEXIT――――――――――――――<SCAN><P

11 1Table Of Contents 1 Precautions…. ………………………………………………………… 2 2 Features……...………………………………………………………… 3 2.1 Built-in Decoder…………………………………

1919 19preset NO. you want to add in the sequence. c.When the < > is on the item INS, move the joystick upward and downward to select edition m

2020 20E.<ZONES> MOTION<SEQUENCE><PATTERN><ZONES><TIMING ACTION><AUTO TRACKING>BACKEXIT――――――――――――――<SCAN>

2121 21F.TIMING ACTION TIMING ACTION――――――――――――――A1B1C1D1E1NO.F1STARTSTOP MOTION123456780 0 : 0 00 0 : 0 00 0 : 0 00 0 : 0 00 0 : 0 00 0 : 0 00 0 :

2222 22G. AUTO TRACKING MOTION<SCAN><SEQUENCE><PATTERN><ZONES><TIMING ACTION><AUTO TRACKING>―――――――――――――― <

2323 23A. IDLE ACTION IDLE ACTIONTIME : 3 0 SECACTION : NO ACTIONBACK EXIT――――――――――――――A1B1DOME SETTINGS<IDLE><

2424 24C1. ALARM MODE Move the cursor on ALARM MODE to set the current mode of alarm as ON, OFF and AUTO. D1. TRIGGER ACTION Move the cursor on TRIGG

2525 25D. PRIVACY MASK DOME SETTINGS<IDLE><ALARM><AUX><PRIVACY MASK><CLOCK><PASSWORD><OTHERS>――――――――――――――

2626 26A1：DATE Move the joystick leftward and rightward to select year, month and day. Move the joystick upward and downward to select the number. B1

2727 27B1. Move the cursor to CAPS. Press IRIS ON and move the joystick upward and downward to select capital and small letters. C1. ALPHABET Move

2828 28CAMERA LANGUAGE: ENGLISH<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS><CAMERA>

22 21 Precautions 1.Transportation Security No heavy stress, violent vibration or water splash are allowed during transportation, storage. The unit

2929 298 Trouble Shooting Problems Possible Reason Solution Power line connected wrong Correct it Power damaged Replace Blowout Replace Power on, n

33 32 Features 2.1 Built-in Decoder ● Power-off protection, no data loss ● 220 programmable presets ● 8 cruising tracks, each cruising track has

44 43 Technical Data 3.1 Technical Parameters of the High-speed Dome Model TC-2600BS High Speed Dome Power Supply AC24V/2.5A Operating Temperature -

55 5Video Output 1Vp-p75 ohms Back Light Compensation Auto Focus Auto/Manual Iris Auto/Manual S/N Ratio ≥50dB Electric Shutter 1/50~1/10000s 1/1~1/

66 6 4.3 Installation Size 4.4 Installation Procedures *Notice: The surface mount speed dome should be applied to hard ceiling.

77 7 (3) Mount 3 expansion screws into the holes. (4) To lock the base plate to the dome housing, line up the A and B tabs on the dome body with t

88 8 (5) Match the 3 locators on the housing with the gaps one the plate and then turn the housing clockwise. Then pull down the housing lightly to